Hales Machine Tool, Inc. is a leading machine shop in the Twin Cities located in Plymouth, MN. Coming straight from a referral, Hales Machine contacted Randal Construction to assist them with some roof repairs, tuckpointing and block repairs. Our team quickly made a site visit identified the issues and was able to provide them with a complete turn-key solution.
Below were some of the roof repairs that were completed:
Roof Repair Inspection Report:
During our visual inspection of the roof we observed several issues that should be addressed to keep this roof system watertight. We found several defects, some larger than others, which could be allowing water into the roof system or building. After our removal and investigation into the metal coping detail, we observed that the waterproofing under the coping is a single ply of roofing felt. This roofing felt by itself is an impregnatable material and is not a waterproofing membrane.
The metal coping itself was not fabricated long enough on the inside of the canted edge parapet. This is not allowing the metal to cover enough of the base flashing and fasteners, leaving them exposed.
We also observed several small leak issues, from sealant failure to holes in details. We found that the scupper flashings have also come loose and may be allowing water into the wall system.
There were also several blisters found in the base flashings at the parapet and one in the roof field. This can be caused by an installation issue or moisture issue.
Tuckpointing & Block Repair
After reviewing the inspection with the owners of the building we also inspected the building and found over 50 areas in need of tuck pointing and block repair. Once the roof repair was complete we began the tuck pointing and block repair. Our masonry team completed the necessary block repair and our sandblasting team came in to prep the building for a fresh paint job.
To finish the exterior overhaul we had our painting crew come in and put a beautiful finish on the building, really giving the building a fresh new look. Take a peak at the pictures below and please give Randahl Construction, Inc. a call for a free roof or building inspection
Roof Repair, Tuckpointing, Block Repair, Exterior Sandblast & Painting
Hales Machine Tool, Inc.
2730 Niagara Lane North, Plymouth, MN 55447
After a detailed inspection Randahl Construction, Inc. made critical roof repairs helping the building maintain a water proof condition. Along with the roof repairs, The Randahl Construction Masonry Team performed tuckpointing and block repair through the entire back of the building and dock area prepping the building for a sandblast. The building was then sandblasted and painted with an industrial paint finish completing the exterior remodel.
Roof & Block Repair Project - Plymouth, Minnesota
Hales Machine Tool, Inc - Plymouth, MN
Debris on Roof
Block Repairs Needed Around Dock
Exterior Building Repairs
Tuckpointing Around Building
Block Repair & Tuckpointing
Block Repair on Truck Dock
Building Block Repair
Exterior Building Prep
Sandblasting for Exterior Painting
Sandblasting the Building for Exterior Paint
Exterior Painting Contractor
Professional Exterior Painting
Exterior Painting Contractor
Randahl Construction - Painting Division
Exterior Painting on Building